Semi-Dry ADSS Kabel ADSS-PE-6/8/12/24/48/96/144B1.3 (80m ynstallaasje span)
Optyske glêstried (ITU-T G.652D)
Skaaimerken | Units | Oantsjutte wearden | |
Optyske skaaimerken | |||
Soart fiber | Single modus, Doped silica | ||
Attenuation | @1310nm @1550nm @1625nm | dB/km | ≤0,36 ≤0,23 ≤0,25 |
Dispersjonskoëffisjint | @1288-1339nm @1550nm @1625nm | ps/(nm.km) | ≤3.5 ≤18 ≤22 |
Nul dispersion golflingte | nm | 1300-1324 | |
Zero dispersion helling | ps/(nm2.k m) | ≤0,092 | |
| Polarisaasjemodus fersprieding PMD Maksimum Yndividuele Fiber PMD Link Design Wearde |
ps/km1/2 |
≤0.2 ≤0,15 | |
Kabel Cut-off golflingte λcc | nm | ≤1260 | |
Mode fjild diameter (MFD) @ 1310nm | μm | 9,2±0,4 | |
Geometryske skaaimerken | |||
Bekleding diameter | μm | 125,0±0,7 | |
Cladding non-circularity | % | ≤1.0 | |
Coating diameter (primêre coating) | μm | 245±10 | |
Coating / Cladding concentricity flater | μm | ≤12,0 | |
Core / cladding concentricity flater | μm | ≤0.6 | |
Curl (radius) | m | ≥4 | |
Meganyske skaaimerken | |||
Bewiis test offline | N % kpsi | ≥8.4 ≥1.0 ≥100 | |
Bending Ofhinklikens Induced Attenuation 100 bochten, 60mm diameter @1625nm | dB | ≤0.1 | |
Temperatuerôfhinklikens-induzearre attenuaasje @ 1310 & 1550nm -60 ℃ ~ +85 ℃ |
dB/km |
≤0,05 | |
Cross-sectional tekening fan kabel
Identifikaasje fan fezels en losse bufferbuizen
NEE. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
Tube kleur | Blau | Oranje | Grien | Brún | Griis | Wyt | Read | Swart | Giel | Pears | Rôze | Aqua |
6F | 6B1.3 | Filler | Filler | Filler | Filler | Filler | / | / | / | / | / | / |
8F | 4B1.3 | 4B1.3 | Filler | Filler | Filler | Filler | / | / | / | / | / | / |
12F | 6B1.3 | 6B1.3 | Filler | Filler | Filler | Filler | / | / | / | / | / | / |
24F | 6B1.3 | 6B1.3 | 6B1.3 | 6B1.3 | Filler | Filler | / | / | / | / | / | / |
48F | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | Filler | Filler | / | / | / | / | / | / |
96F | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | / | / | / | / |
144F | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 | 12B1.3 |
Kleur koade fan fezels: blau, oranje, grien, brún, griis, wyt, read, swart, giel, fiolet, roze en aqua. | ||||||||||||
Main meganyske prestaasjes fan kabel
Kabel Type | Spanning (MAT, N) | Crush (N/100mm) | |
Koarte termyn | Lange termyn | ||
ADSS-PE-6~144B1.3-80m | 2500 | 1000 | 300 |
Diameter en gewicht fan kabel
Kabel Type | Outer Diameter (±5%) mm | Ca. Gewicht kg/km |
ADSS-PE-6/8/12/24B1.3-80m | 9.8 | 72 |
ADSS-PE-48B1.3-80m | 10.6 | 86 |
ADSS-PE-96B1.3-80m | 12.0 | 112 |
ADSS-PE-144B1.3-80m | 14.8 | 170 |
Fysike meganyske en miljeu-prestaasjes en tests
Toets | Standert | Oantsjutte wearde | Akseptaasje kriteria |
Spanning | IEC 60794-1-21E1 | Testlingte: ≥50m; Load: Sjoch sec.3.2; Duration: 1 min. | Nei test, ekstra attenuation: ≤0.1dB; Gjin skea oan uterlikejas en ynderlike eleminten. |
Crush | IEC 60794-1- 21E3A | Load: Sjoch sec.3.2; Duration: 1 min. | Nei test, ekstra attenuation: ≤0.1dB; Gjin skea oan bûtenste jas en ynderlike eleminten. |
Impact | IEC 60794-1-21E4 | Radius: 300 mm; Impact enerzjy: 10 J; Impact number: 1; Ynfloedpunten: 3. | Nei test, ekstra attenuation: ≤0.1dB; Gjin skea oan bûtenste jas en ynderlike eleminten. |
| Werhelle bûge | IEC 60794-1-21E6 | Diameter fan pulley: 20 × OD; Oantal bochten: 25 kear; Load: 150N. | Nei test, ekstra attenuation: ≤0.1dB; Gjin skea oan bûtenste jas en ynderlike eleminten. |
Torsion | IEC 60794-1-21E7 | Axial Load: 150N; Lengte ûnder test: 1m; Cycles: 10; Rotationshoeke: ±180°. | Nei test, ekstra attenuation: ≤0.1dB; Gjin skea oan bûtenste jas en ynderlike eleminten. |
Temperatuer cycling | IEC 60794-1-22F1 | -20℃~+60℃, 2 syklusen, 8h | De wiziging yn' e attenuationkoëffisjint moat minder wêze as 0,1 dB/km. |
| Wetter penetraasje | IEC 60794-1-22F5 | Sample 3m, wetter 1m, 24h | Gjin wetterlek. |
Lengte markearring
