Habka OVD: 150mm G.652.D Hordhac Fiber Fiber
Tilmaamaha Preform
Cabbirrada Preform
Cabbirrada horudhaca ahi waa inay ahaadaan sida ku xusan Jadwalka 1.1 ee hoose.
Shaxda 1.1 Horudhac Cabbirrada
| Shayga | Shuruudaha | Odhaah | |
| 1 | Celceliska Dhexroorka Qaabka Hore (OD) | 135 ~ 160 mm | (Xusuusin 1.1) |
| 2 | Dhexroorka hore ee ugu badan (ODmax) | ≤ 160 mm | |
| 3 | Dhexroorka Qaabka ugu Yar (ODmin) | ≥ 130 mm | |
| 4 | Dulqaadka OD (gudahood foomka hore) | ≤ 20 mm (qayb toos ah) | |
| 5 | Dhererka Preform (oo ay ku jirto qaybta gacanta) | 2600 ~ 3600 mm | (Xusuusin 1.2) |
| 6 | Dhererka waxtarka leh | ≥ 1800 mm | |
| 7 | Dhererka taper | ≤ 250 mm | |
| 8 | Dhexroorka dhamaadka taper | ≤ 30 | |
| 9 | Horudhac aan wareeg ahayn | ≤ 1% | |
| 10 | Khaladka xooga saarida | ≤ 0.5 μm | |
| 11 | Muuqashada | (Xusuusin 1.4&1.5) |
Jaantuska 1.1 Qaabka Hordhac
Fiiro gaar ah 1.4: Xumboyada ku jira gobolka bannaanka ee daboolan (eeg sawirka 1.2) waa in la oggolaadaa, iyadoo ku xiran cabbirka; tirada xumbo halkii mugga waa in aanay ka badnaan kuwan ku qeexan shaxda 1.2 ee hoose.
Shaxda 1.2 Xumbo ku jirta Preform
Goobta iyo Baaxadda Xumbo | Tirada / 1,000 cm3 | |
Gobolka xudunta ah (= xudunta + daboolka gudaha) | (Fiiri qoraalka 1.5) | |
| Gobolka Duleedka (=interface + daboolka sare) | ~ 0.5 mm | Ma jiro Tiro |
0.5 ~ 1.0 mm | ≤ 10 | |
1.0 ~ 1.5 mm | ≤ 2 | |
1.5 ~ 2.0 mm | ≤ 1.0 | |
2.1 mm ~ | (Fiiri qoraalka 1.5) | |
Jaantuska 1.2 Aragtida Qaybaha Isdhaafka ah ee Hordhac
Jaantus 1.2 Aragtida Qaybaha Isdhaafka ah ee Hordhac
Miisaanka la qaadi karo
Tilmaamaha Fiber-ka ee Bartilmaameedka
Marka shuruudaha sawir-qaadista iyo xaaladaha cabbirku ay yihiin kuwa ugu wanaagsan oo xasilloon, qaab-dhismeedka hore waa in la filayaa in ay buuxiyaan qeexitaannada fiber-ka ee bartilmaameedka ah sida ku cad Shaxda 2.1.
Shaxda 2.1 Tilmaamaha Fiber-ka Bartilmaameedka
Shayga | Shuruudaha |
| |
1 | Attenuation at 1310 nm | ≤ 0.34 dB/km |
|
Attenuation at 1383 nm | ≤ 0.34 dB/km | (Xusuusin 2.1) | |
Attenuation at 1550 nm | ≤ 0.20 dB/km |
| |
Attenuation at 1625 nm | ≤ 0.23 dB/km |
| |
Isku mid ahaanshaha Attenuation | ≤ 0.05 dB/km at 1310&1550 nm |
| |
2 | Dhexroorka Goobta Mode at 1310 nm | 9.1± 0.4µm |
|
3 | Mawjadda Goynta Cable-ka (λcc) | ≤ 1260 nm |
|
4 | Mawjadaha kala firdhisan eber (λ0) | 1300 ~ 1324 nm |
|
5 | Fidinta at 1285 ~ 1340 nm | -3.8 ~ 3.5 ps/(nm·km) |
|
6 | Fidinta 1550 nm | 13.3 ~ 18.6 ps/(nm·km) |
|
7 | Fidinta 1625 nm | 17.2 ~ 23.7 ps/(nm·km) |
|
8 | Kala firdhinta λ0 | 0.073 ~ 0.092 ps/(nm2·km) |
|
9 | Khaladka Muhiimka ah ee Muhiimka ah | ≤ 0.6 µm |
Fiiro gaar ah 2.1: Hoos u dhigista 1383 nm ka dib baaritaanka gabowga hydrogen laguma darin shaxda 2.1 sababtoo ah waxay si aad ah ugu xiran tahay xaaladaha sawirka fiber-ka.