GFRP ine 0.5mm Dia.
Inspection Status List
S/N | Testing chinhu | Mhedziso |
1 | Chitarisiko | Qualified |
2 | Diameter kutsauka | Qualified |
3 | Density | Qualified |
4 | Kusimba simba | Qualified |
5 | Elongation panguva yekuzorora | Qualified |
6 | Tensile modulus ye elasticity | Qualified |
7 | Kutora mvura | Qualified |
8 | Minimum instantaneous bending radius | Qualified |
9 | High tembiricha bending performance | Qualified |
10 | Low tembiricha bending performance | Qualified |
11 | Torsion midziyo (±360˚) | Qualified |
Test mhinduro
S/N | Testing chinhu | Unit | Mitemo uye Zvinodiwa | Test mhinduro | Mhedziso | ||||||
1 | Chitarisiko | -- | Ruvara rwakafanana uye runopindirana, pasina kuputika kana kuputika pamusoro, uye kunzwa kwakatsetseka | Ruvara rwakafanana uye runopindirana, rusina kuputika kana kuputika pamusoro, uye kunzwa kwakatsetseka | Qualified | ||||||
| 1) Kuedza nzira Maererano ne: YD/T 1181.1-2015 4.1.1 | |||||||||||
| 2) zuva, mamiriro ezvakatipoteredza, nzvimbo
| |||||||||||
| 3) Kuedza michina
| |||||||||||
Test mhinduro
S/N | Testing chinhu | Unit | Mitemo uye Zvinodiwa | Test mhinduro | Mhedziso | ||||||
2 | Diameter kutsauka | mm | ±0.02 | -0.01 | Qualified | ||||||
| 1) Kuedza nzira Maererano ne: YD/T 1181.1-2015 5.2 | |||||||||||
| 2) zuva, mamiriro ezvakatipoteredza, nzvimbo
| |||||||||||
| 3) Kuedza michina
| |||||||||||
Test mhinduro
S/N | Testing chinhu | Unit | Mitemo uye Zvinodiwa | Test mhinduro | Mhedziso | ||||||
2 | Diameter kutsauka | mm | ±0.02 | -0.01 | Qualified | ||||||
| 1) Kuedza nzira Maererano ne: YD/T 1181.1-2015 5.2 | |||||||||||
| 2) zuva, mamiriro ezvakatipoteredza, nzvimbo
| |||||||||||
| 3) Kuedza michina
| |||||||||||